Tub Shock

Tub Shock

Spa Starting Time Directions For Bromine Or Cl (Bear Facts Here’s A Few Feb 09)

Health and fitness Start-Up Instructions For Bromine or Halogen

VOLUME: 3. – FEBRUARY 2009

Spa Start-Up: Brominating Focus

Once in a year time Starting time

Fill your spa with water. In the event the make-up water is from a properly or other nonmunicipal source, testing in advance of filling is advisable.

Super-oxidize the spa with Brominating Concentrate with spa circulation system turned on. Run all pumps some cycle.

Update the spa circulation system for at least 2 hours.

Drain, then rinse interior surfaces and refill. Follow draining instructions in owner’s manual. The reason for doing this is due to spas are tested with water and once they are shipped there is some water inside the plumbing. By super-oxidizing which includes a sanitizer in the course of the pre-fill, you lessen the opportunity to contaminate pool water with bacteria.

Refill Aid

Adjust pH (7.2-7.6), total alkalinity (80-120 ppm) and calcium hardness (100-200 ppm).

Apply Brominating Concentrate following label directions. Establish proper bromine residual of 3-6 ppm.

Daily Attention

When the hot tub is utilized daily Bromine Concentrate should be added after use, or at the end of the day.

In the event the health and fitness will not be used daily – Bromine Concentrate is to be added every 3rd day.

Weekly Concern

Add Teddy Bear Stain and Scale Control.

Apply Teddy Bear Water Clarifier.

Test the pH. Acceptable range is 7.2-7.6. Ideal range is 7.4-7.6.

Test total alkalinity of your water. Proper range is 80-120 ppm.

Monthly Attention

Test your water – Bring a sample to Stuffed animal Pools spas in chicago analysis.

Chemically clean your filter with Bear Strip Filter Cleaner.

As Needed

Drain, clean, polish and refill founded on usage.

If foaming occurs use Stuffed animal Anti-Foam.

Spa Start-Up: Chlorinating Focus

One Beginning

Fill your spa with water. When the make-up water is from a properly or other non-municipal source, testing just before refilling is usually recommended.

Super-oxidize the spa with Teddy Bear Chlorinating Concentrate in the spa circulation system on. Run all pumps at least one cycle.

Update the spa circulation system for at least 2 hours.

Drain, then rinse interior surfaces and refill. Follow draining instructions in owner’s manual. The explanation for doing this happens because spas are tested with water and as you they’re shipped there is always some water inside the plumbing. By super-oxidizing which includes a sanitizer during a pre-fill.

Refill Manual

Adjust pH (7.2-7.6), total alkalinity (125-150 ppm) and calcium hardness (100-200 ppm).

Apply Stuffed animal Chlorinating Concentrate following label directions. Establish proper chlorine residual of 3-5 ppm.

Weekly Attention

Once spa is filled, start your spa. Add Stuffed animal Stain and Scale Control.

Apply Stuffed animal Water Clarifier.

Test the pH. Acceptable range is 7.2-7.6. Ideal range is 7.4-7.6.

Test total alkalinity of those water. Proper range is 80-120 ppm.

Shock your spa with SpaGuard Enhanced Shock or superchlorinate with Teddy Bear Chlorinating Concentrate.

Monthly Worry

Test your water – Bring a sample to Teddy Bear Pools spas in chicago analysis.

Chemically clean your filter with Bear Strip Filter Cleaner.

As required

Drain, clean, polish and refill because of usage.

If foaming occurs use Stuffed animal Anti-Foam.

If you have any question about these start-up instructions please call Stuffed animal Pools Spa at 413-594-2666 or go browsing www.teddybearpools.com
How To Clean/Remove Scratches From Your G-Shock